Skip to main content

One-time task

A one-time task executes an action once at a date and time of your choosing.

📋 Overview​

With a one-time task you schedule an action that is executed once at a configured date and time. You choose an actuator or automation and define what action is performed on it.

🎛️ Possibilities​

Type​

You set what type of task you are adding. In this case One-time.

Condition​

You set at which future moment the task is executed:

  • Date: The day on which the task is executed.
  • Time: The time at which the task is executed.

Action​

You choose an actuator or automation on which the task performs an action. The available actions depend on the actuators and automations available in the installation.

Tariff switcher:

  • Tariff: Set the tariff to Low/Off-peak or High/Peak.

Switches:

  • State: Select the desired state. Depending on the type of switch, different states are possible, e.g. Off, On, Normal, High, Max.
  • Keep in this state for a minimum duration: Enable this to keep the device in the selected state for at least a set duration. Other tasks cannot change the state during this lock period. Set the Minimum duration (in minutes).

Power curtailment:

  • State: Select the desired state for power limitation (Off, On).
  • Power: When enabled, set the desired power using the slider (0–100%).

Charge/discharge control:

  • State: Select the desired state for the battery (Off, Discharge, Charge).
  • Power: When discharging or charging, set the desired power using the slider (depending on the battery capacity).

Automations:

  • State: Select whether the automation becomes Active or Paused.

📝 Managing tasks​

Adding a one-time task​

  1. Go to Tasks within your installation.
  2. Click + Add to add a new task.
  3. Select One-time as the type and click Next.
  4. Set the date and time at which the task should be executed. Click Next.
  5. Select the desired actuator or automation.
  6. Configure the desired action based on the selected actuator or automation.
  7. Click + Create to save the task.

Editing a task​

Select the relevant task and click Edit. Adjust the desired settings. Click Save to save your changes.